About us
Hidra-Forg Kft. was founded in 2003. Our main goal is to make lift tables and other special hydraulic devices for our customers. We manifacture and test every part of the lifting devices here, in Zsámbok, to make sure the customer recieves the best machine on the market. Our products comply with the regulation EN-1570.
We make single and double acting hydraulic cylinders for our products and for order as well. Since most of the parts are custom made for our devices, we provide the necessary parts for our products for at least 8 years.
We assemble the hydraulic units at our headquarters. Submerged oil motors are used for these units since these motors last longer, because the cooling system is better. We also make the cylinders and hydraulic units for order, not just for our devices.
Customizable options
Choosing the platform size, lifting height and the capacity of the lift table is up to the customer.
There are “standard” extras for the lift tables. These features are the most common upgrades for our devices.
– Hydraulic lips (we do not make manual lips since they are heavy and hard to move
– Rails
– Doors
– Remote controller with cable
Our customers get to choose the colour of the device. We only ask for RAL code.
How to order
In this short list you will see what details we need in order to give you a proper offer.
- The first thing we need to know is the platform size, capacity and lifting height of the lifting table. Unfortunately, the closed height of the lift table cannot be reduced from the one we give to our customers, because there must be enough space for the scissors under the platform.
(It is important to know that the more scissor the lift table needs, the higher the price goes. In other words, if the platform size is increased in order to reduce the number of the scissors, the lift table will be cheaper.) - If the lift table will be installed in a pit, we will send a drawing with every detail. (Position of the tubes, required depths, width, length etc.)
- Attachements (rails, etc.)
- Colour